Hello just got my test results in and obviously the the 1st thing I need to do is adjust pH and TA. My questions for now is at what rate and in what order should I be adding Washing Soda (Sorry I don't have any Borax) and calcium chloride. Here is my most current pool chemistry
FC - 0.1
TC - 0.1
CC - 0
pH - 6.5
Hardness - 15
TA - 8
CYA - 2
Copper 0.6
Iron 0.1 ppm
While going through the original owners chemicals I accidentally added a copper based algaecide and guess they were also using it in the past. Since the other levels were so off I plumbed the heater out of the system as I'm sure the water was eating the cores up as well. I'd still like to meet the individual who added a heather into the system with out a bypass lol. The pool is also way over filled it has been raining like crazy here, so I'll be getting a small percentage of the copper out as I remove water.
Thanks in advance for all your help.
FC - 0.1
TC - 0.1
CC - 0
pH - 6.5
Hardness - 15
TA - 8
CYA - 2
Copper 0.6
Iron 0.1 ppm
While going through the original owners chemicals I accidentally added a copper based algaecide and guess they were also using it in the past. Since the other levels were so off I plumbed the heater out of the system as I'm sure the water was eating the cores up as well. I'd still like to meet the individual who added a heather into the system with out a bypass lol. The pool is also way over filled it has been raining like crazy here, so I'll be getting a small percentage of the copper out as I remove water.
Thanks in advance for all your help.