I have an 18ft round AGP that is four years old. The salesman did me a "favor" by selling me the largest cartridge pump available at the pool store.
I have a Hayward Swimpro CC1250 filter rated at a max flow of 90gpm.
The pump is a Hayward Powerflow LX with a 2hp motor.
The motor plate states it is an AO Smith motor part 7-193554-01.
Frame: R48Y
HP: 2.0
SF: SFL
Code: H
115V 60hz 1ph 15 Amps
I would like to go to a more appropriate size motor but can I use the same pump? Will I need to change out the impeller? According to the Hayward pump manual I am suppose to refer to the part number on the impeller.
Any suggestions on a good source fo rthe motor?
Thanks,
Rich
I have a Hayward Swimpro CC1250 filter rated at a max flow of 90gpm.
The pump is a Hayward Powerflow LX with a 2hp motor.
The motor plate states it is an AO Smith motor part 7-193554-01.
Frame: R48Y
HP: 2.0
SF: SFL
Code: H
115V 60hz 1ph 15 Amps
I would like to go to a more appropriate size motor but can I use the same pump? Will I need to change out the impeller? According to the Hayward pump manual I am suppose to refer to the part number on the impeller.
Any suggestions on a good source fo rthe motor?
Thanks,
Rich