I acquired a pool with a reposed house a year and a half ago . I found y'all before had a new liner put in. So when I got it opened I installed a salt system and have been using these methods from day one. I have never had a problem. I sit out there and just looking for stuff to do. Well this year I have taken on two more pools, one salt water that I took from a solid green mess to crystal clear in five days. The other is a bromine pool. I know very little about this. I have never had a bromine level of over 1ppm. It had a Hayward feeder on it and it was turned all the way. The pump went out and it sat for two days with no water movement. I replaced the pump and put a 15 pound feeder on it with a one inch line today. The water was semi foggy today so I added two gallons of 12.5% and about 80oz Dichloro 99%. I tested about an hour after that and had a FC reading of 7.5. What is my test kit ( TF 100 ) reading, chlorine or bromine? How do I shock this pool properly ? And what levels do I keep this pool at? Any help will be much appreciated.
Sent from my iPad using Tapatalk HD
Sent from my iPad using Tapatalk HD