okay. I know everyone has trouble with this. but how much is the dot supposed to disapear? are you not suppsed to see it all? or really fuzzy? 2 weeks ago I tested and I found ~25ppm (top of tube) for dot to disapear, since than I have added 1kg of stailizer, and had stabilized pucks floating in my pool all week, (should be at 40ppm now) tested again today, and it is just over the 30 line.. not quite full.. but not 30... for it to disapear... am I doing something wrong? it has been 1 1/2 weeks ATLEAST since the stabilizer was disolved in my pool.. so it should show by now.. right?
on to CH testing..
I did the testing as per instructions.. I am using the 10ml sample (ithink thats the one) to multiply drops by 25.. and can not get my smaple to turn blue.. I had 130 drops in the tube.. and it was clear... maybe a faint blue tint.. but I would say clear.. not blue by any means.. could my regent just be no good?
it goes to pink and then clears.. and stays clear.. no matter how many drops i put in..
FC 3
CC 0
PH 7.4
TA 140
CH - ???
CYA - 25-30?
on to CH testing..
I did the testing as per instructions.. I am using the 10ml sample (ithink thats the one) to multiply drops by 25.. and can not get my smaple to turn blue.. I had 130 drops in the tube.. and it was clear... maybe a faint blue tint.. but I would say clear.. not blue by any means.. could my regent just be no good?
it goes to pink and then clears.. and stays clear.. no matter how many drops i put in..
FC 3
CC 0
PH 7.4
TA 140
CH - ???
CYA - 25-30?