- Aug 9, 2012
- 5
This spring, I installed a through the wall skimmer on my Intex pool. At the same time, I installed an Intex Saltwater System to go along with my Intex sand filter system. The water flows from the skimmer to the pump into the sand filter to the saltwater system then into the pool. It worked great for the first week, that is when I bought a set of plastic steps to attached to the wood steps I have on the outside. Now the water seems to be clear, but it forming a bunch of Crud on the bottom and the sides of the pool. I scrub it, and vacuum it, it will stay clean for a day, then I am back to scrubbing and vacuuming. I know it is not from trees, because my pool is centerally located in the yard, where I removed all the trees a couple of years ago. the nearest tree would have to be almost 100 yards away.\
Anyone have any suggestons as to what I am doing wrong, or a way to fix the problem?
I am heading out to test the water with the test strips and I will have that information posted on here shortly.
Anyone have any suggestons as to what I am doing wrong, or a way to fix the problem?
I am heading out to test the water with the test strips and I will have that information posted on here shortly.