I started my conversion last night at 8:30pm. I added the correct amount of 8.25% Bleach from the pool calculator. I waited an hour and a half then tested my FC with a Taylor 2006. This is where the questions start:
1- When I first tested I had to add about 4 scoops of the powder into the 10ml test kit and it only turned a light shade of pink (not the dark shade I see on the testing videos). Then when I added the reagents It look over 30 drops and it would only stay clear for a second or two. So I called it good for the night.
2-6:30 this morning I test for FC and I put 4 big scoops of the poweder into 10ml of pool water and nothing just clear water. Does that mean that I have no FC?
Thanks in advance,
The Sad Pool Boy
1- When I first tested I had to add about 4 scoops of the powder into the 10ml test kit and it only turned a light shade of pink (not the dark shade I see on the testing videos). Then when I added the reagents It look over 30 drops and it would only stay clear for a second or two. So I called it good for the night.
2-6:30 this morning I test for FC and I put 4 big scoops of the poweder into 10ml of pool water and nothing just clear water. Does that mean that I have no FC?
Thanks in advance,
The Sad Pool Boy