So I am new to all this, so if I am off base please let me know. I would like to add salt to my pool for the added "feel". I do not have a SWG, so how is the best way to add it? Just dump SLOWLY and brush? Does the salt effect the pump and filter? Pool Calc says 350lbs to get 2000ppm, which I have read on here is a good number without a SWG. I have a t-100 and use BBB. Is there any chemical number I need to be at, like with borates, before adding? any advice good or bad would be helpful.
test last night...
FC 6.6
CC 0
ph 7.8
TA 110
cya 60
CH 190
brought the PH down to 7.2 and TA to 100
test last night...
FC 6.6
CC 0
ph 7.8
TA 110
cya 60
CH 190
brought the PH down to 7.2 and TA to 100