Woke up to a Milky pool!! With coffee in hand I checked my Hayward Swimpure Plus generation box and noticed the power light and all the action lights were out. Additionally, the LED screen was reading 2700.
I first checked the Diagnostic button and ran through the cycle. This revealed that the box and cell had the proper amps. 2nd I checked the main breaker to make sure there was no power issue. I disconnected the cell, inspected and cleaned it. There was a little debris caught in the front of the cell. I checked the flow switch which appeared to be fine. I also checked the length of the wires to check for breaks, cracks or bare wires. I have a Jandy Cartridge filter and took the time to clean the system to assure that it wasn't a flow or pressure issue.
In Closing the panel box is reading the LCD diagnostics only, the five lights are still out. from top to bottom, power, generation, salt low, salt high, flow..
I first checked the Diagnostic button and ran through the cycle. This revealed that the box and cell had the proper amps. 2nd I checked the main breaker to make sure there was no power issue. I disconnected the cell, inspected and cleaned it. There was a little debris caught in the front of the cell. I checked the flow switch which appeared to be fine. I also checked the length of the wires to check for breaks, cracks or bare wires. I have a Jandy Cartridge filter and took the time to clean the system to assure that it wasn't a flow or pressure issue.
In Closing the panel box is reading the LCD diagnostics only, the five lights are still out. from top to bottom, power, generation, salt low, salt high, flow..