I am new to the group.
I have had a pool I have been 8, so I am an expect in pool care.
This year, the family requested warmer water for the pool. Like 83 with solar cover during the summer is not warm enough for them!
Anyway, I purchased the Sunheater for the pool. I have assembled the panels and I do not have any leaks. I have a Hayward DE filter and the pool is 24 feet round. I hooked everything up and the Sunheater filled with water.
The problem is:
Prior to attaching the filter to the sunheater, the filter was working at 16-18 PSI, now, it is at 6 PSI. Low PSI is not good for pool maintenance!
I am stumped, I have lost PSI before, when I would vacuum. I would shut off the filter, and the PSI would return to normal. However, I have not been successful getting the PSI above 6 when attached to the Sunheater.
Any and all suggestions are appreciated to resolve this issue.
I have had a pool I have been 8, so I am an expect in pool care.
This year, the family requested warmer water for the pool. Like 83 with solar cover during the summer is not warm enough for them!
Anyway, I purchased the Sunheater for the pool. I have assembled the panels and I do not have any leaks. I have a Hayward DE filter and the pool is 24 feet round. I hooked everything up and the Sunheater filled with water.
The problem is:
Prior to attaching the filter to the sunheater, the filter was working at 16-18 PSI, now, it is at 6 PSI. Low PSI is not good for pool maintenance!
I am stumped, I have lost PSI before, when I would vacuum. I would shut off the filter, and the PSI would return to normal. However, I have not been successful getting the PSI above 6 when attached to the Sunheater.
Any and all suggestions are appreciated to resolve this issue.