Hello,
18x36 IG DIY under construction....
I've got the steel panels in place and am in the process of squaring things up. Should I expect the panel dimensions to be exactly 18x36 ??
For example, at the deep end, i can only get the width down to 18' 1" before the end wall starts to bow out. there's no swim-out......just straight wall. (also, all measurements are taken at the base of the panels, not the top)
I'm to the point that I don't think I'm going to be able to get a net measurement of 18x36.
if everything is plumb / level / square and the dimensions end up being an 1" or so bigger, will that work?
Thanks for any advice...
TH
18x36 IG DIY under construction....
I've got the steel panels in place and am in the process of squaring things up. Should I expect the panel dimensions to be exactly 18x36 ??
For example, at the deep end, i can only get the width down to 18' 1" before the end wall starts to bow out. there's no swim-out......just straight wall. (also, all measurements are taken at the base of the panels, not the top)
I'm to the point that I don't think I'm going to be able to get a net measurement of 18x36.
if everything is plumb / level / square and the dimensions end up being an 1" or so bigger, will that work?
Thanks for any advice...
TH