Finally got everything situated and starting the shock process... here is what I have so far... i have a concern on the PH, but should I stress it right now, or wait til shock process is complete?
FC: 10
CC: .5
CYA: 0
PH: 8+
TA: 100
CH: 140
Instead of starting off with bleach (stenner not quite setup yet), I decided to go with dichlor bags to shock and (hopefully) get a start on the CYA, but I bought a bucket of it anyways. Everything else seems to be in range but the PH. Should I start tackling that now? If I do start bringing it down with muriatic acid, is it really "safe" to use in a vinyl pool? cause everything I read says that's a no no...
FC: 10
CC: .5
CYA: 0
PH: 8+
TA: 100
CH: 140
Instead of starting off with bleach (stenner not quite setup yet), I decided to go with dichlor bags to shock and (hopefully) get a start on the CYA, but I bought a bucket of it anyways. Everything else seems to be in range but the PH. Should I start tackling that now? If I do start bringing it down with muriatic acid, is it really "safe" to use in a vinyl pool? cause everything I read says that's a no no...