Opened up pool as per usual given pool store instructions - 4 pounds of dichlor, waited an hour, added 1 qt 3-month algaecide, added mineral pac to XL Pro. Next day, water cloudy, T/A-140ppm, F/C - 0, T/C - 5.0, CYA - 30, pH - 7.4. Pool store said chlorine was "bound up" and I needed to add 9 gallons 12.5% liquid chlorine. I performed the bucket test to make sure and it seemed to confirm their results. So I added the 9 gallons. After three hours, T/A - 180, F/C - 0, T/C - 5.0, CYA - 25, pH - 6.8. I also tested ammonia and it's 10.0 PPM. So now I seem to have all sorts of problems. But where do I start? I'm assuming raise the pH and add stabilizer, but how much chlorine do I need to add to overcome the ammonia issue? BTW - pool is still cloudy. HELP PLEASE!!!