Hello All.
In the process of getting ready for pool opening, and my pump was running a bit hot last year, and now the coating is flaking off, and has hot spots as you can see.
[attachment=0:2qa7bnnu]photo 2.JPG[/attachment:2qa7bnnu]
In the process of also converting to a SWG setup. Need to move some of the piping around I think, and wondering what you would do based on the setup of pipes.
I currently have a 1HP Motor, lines seem small to me, and have a 44k gallon plaster pool. Its an old Sylvan Pool for those in NJ Area.
I have one skimmer that is starting to crack from the slab on top sinking in on it ( any ideas on fixing that too? )
Have the dual drains on the bottom of the deep end. 10 foot deep.
Wanted to see what you all recommend on replacing the pump setup, or ideas on plumbing as well.
In the process of getting ready for pool opening, and my pump was running a bit hot last year, and now the coating is flaking off, and has hot spots as you can see.
[attachment=0:2qa7bnnu]photo 2.JPG[/attachment:2qa7bnnu]
In the process of also converting to a SWG setup. Need to move some of the piping around I think, and wondering what you would do based on the setup of pipes.
I currently have a 1HP Motor, lines seem small to me, and have a 44k gallon plaster pool. Its an old Sylvan Pool for those in NJ Area.
I have one skimmer that is starting to crack from the slab on top sinking in on it ( any ideas on fixing that too? )
Have the dual drains on the bottom of the deep end. 10 foot deep.
Wanted to see what you all recommend on replacing the pump setup, or ideas on plumbing as well.