I have a Hayward Aquarite that was purchased in 2003. I replaced the cell about 6 months ago and it was working great. Now the control unit seems to be having issues:
First the reading was at 2700 but the pool was closer to 3000, power and generating lights were on.
Then the reading went to 0 and the Power and Generating green lights would stay on for about 10 seconds, I would hear a click from behind the panel face and then the lights would go off. About 1 minute later they would come on and then click off again. The reading would stay at 0
I am fairly capable at DIY and would love to replace or diagnose just what is wrong rather then having to buy a whole new unit.
Any help would be GREATLY appreciated.
Thanks
First the reading was at 2700 but the pool was closer to 3000, power and generating lights were on.
Then the reading went to 0 and the Power and Generating green lights would stay on for about 10 seconds, I would hear a click from behind the panel face and then the lights would go off. About 1 minute later they would come on and then click off again. The reading would stay at 0
I am fairly capable at DIY and would love to replace or diagnose just what is wrong rather then having to buy a whole new unit.
Any help would be GREATLY appreciated.
Thanks