- Aug 7, 2009
- 32
I recently had a salt water generator installed and got a FAS-DPD kit today. I have been using a Taylor kit without FAS-DPD and my test always read a PPM of about 2 trying to match the pink. With the FAS-DpD test I first filled to 25 ml added two scoops and started titrating. I get to 35 and throw in the towel and decide to use 10ml sample. Again add two scoops and start titrating. 60 drops later it turns clear. Therefore am I reading that my parts per million is 30! If so, why isn't the Taylor standard kit showing up extremely pink and sort of off the chart? BTW CC was
0. I turned down my SWG, but something doesn't seem right.
0. I turned down my SWG, but something doesn't seem right.