Ok, I installed the 8 gallon model on Sunday
I have a 22000 gal IG sand filter,I am using 6% bleach. My CYA is 60
On start up I added 4 bottles of 3/4 gallon bleach, so basically I added 3 gallons of bleach
My intital FC was 12 on Sunday from manual bleach addition, liquidator setting of 1
Monday eve FC dropped to 9, So I bumped the liquidator to 2 for the setting
Tuesday eve FC dropped to 7 so I bumped the liquidator setting to 3.
This am my FC was at 6, so I bumped the Liquidator up to 3.5
My questions are:
Should I have added the full 8 gallons of bleach in the beginning, does the liquidator send out a stronger concentration with more bleach in there?
I tested the water on the suction side and it had a high concentration of chlorine so I know theres chlroine on the side where it goes into the suction side.
Any insights?
I have a 22000 gal IG sand filter,I am using 6% bleach. My CYA is 60
On start up I added 4 bottles of 3/4 gallon bleach, so basically I added 3 gallons of bleach
My intital FC was 12 on Sunday from manual bleach addition, liquidator setting of 1
Monday eve FC dropped to 9, So I bumped the liquidator to 2 for the setting
Tuesday eve FC dropped to 7 so I bumped the liquidator setting to 3.
This am my FC was at 6, so I bumped the Liquidator up to 3.5
My questions are:
Should I have added the full 8 gallons of bleach in the beginning, does the liquidator send out a stronger concentration with more bleach in there?
I tested the water on the suction side and it had a high concentration of chlorine so I know theres chlroine on the side where it goes into the suction side.
Any insights?