- Jun 21, 2012
- 29
Ok so I decided on a very nice glass tile from NPT....OCN-Doheny IS 12....
We're going to trim out along the sides of the stairs, across the front of the spa and continue along the side of remaining stairs.
My designer sent me a spec sheet to scale. I have 54 6" tile spaces to fill.....which is 324 inches....27 linear feet, 13 1/2 sq ft.
My pool guy insists I need 22 sq feet (44 linear ft) There's no waste at all on this pc, it's interlocking so the only two pcs to be cut are the end ones. ( I actually called the tile place myself) I can understand getting a few extra pcs for safety sake but that much?
Can anyone chime in on the tile?
Thanks
We're going to trim out along the sides of the stairs, across the front of the spa and continue along the side of remaining stairs.
My designer sent me a spec sheet to scale. I have 54 6" tile spaces to fill.....which is 324 inches....27 linear feet, 13 1/2 sq ft.
My pool guy insists I need 22 sq feet (44 linear ft) There's no waste at all on this pc, it's interlocking so the only two pcs to be cut are the end ones. ( I actually called the tile place myself) I can understand getting a few extra pcs for safety sake but that much?
Can anyone chime in on the tile?
Thanks