Ok here it goes. I Tested tonight after using the dichlor for the first four night. I think I'm off on the number of gallons we have in our pool. It's not completely full. Also, the intex pump that it came with started giving me fits last night. I dont know if it ran like it was supposed too. My new pump should be here this Thursday. I used the calculator and the advice of this forum and have added 128 oz of dichlor over the four days. I'm worried about the next couple of days with my pump on the fritz. Water is clear although the bottom needs vacuumed. Here are my scary numbers
FC 13.5
CC .5
TA 170
CH 210
CYA < 20 (was getting hard to see but didnt completely go away)
PH 6.8-7.2ish (has fallen from 7.8 over last four days)
So now what do I do? I intend on adding more water but we are on a voluntary water restriction and on the verge of a mandate. I would say its 95% full. Full equals 16297 gallons. Thanks in advance
FC 13.5
CC .5
TA 170
CH 210
CYA < 20 (was getting hard to see but didnt completely go away)
PH 6.8-7.2ish (has fallen from 7.8 over last four days)
So now what do I do? I intend on adding more water but we are on a voluntary water restriction and on the verge of a mandate. I would say its 95% full. Full equals 16297 gallons. Thanks in advance