I just finished tile & grout on my build and just about ready to apply stucco. What type(s) would be recommended and where to obtain it? (Houston area) Pre-colored or mix it yourself? I have somewhere in the neighborhood of 150 sq ft to cover.
I bought the flex fine. The coverage data sheet says 150-165 sq ft but the distributor told me I needed two pails for my 150 sq ft. I took his recommendation and good thing I did. I am into the 2nd pail and still have about 1/4-1/3 of the surface yet to be covered. Looks pretty good but my wife texted a picture to me earlier this morning where some thinset is showing through at the seams and screw locations on one wall. We got heavy rain yesterday after I had applied the concrete adhesive to that wall. Maybe the excess moisture in the air caused my application to go on thin. The other two sides I had done earlier covered fine w/o any show through.Riles_J said:I'm not sure what the "Standard acrylic finish" is, but that doesn't sound like what I used. I think I used the Elastic Flex Sand Finish. And that product covers about 120-130sf per pail. The distributor will hopefully be able to help you out with any questions.