I have a Pentair IC 40 with Easy Touch controller and this is my 4th year with my pool and have had absolutely zero problems until today.
I went down to backflush and saw that no lights on my cell were on...I went ahead and backflushed and still no lights. I turned the breakers off and checked the connection to the bottom of the Easy Touch panel and everything looked ok so I hooded it back up and flipped the breakers on and still no lights. I pushed the IntelliChlor circuit breaker reset and it didn't seem to be tripped and the IntelliChlor Status light on the panel is showing green.
Any ideas? This must have just happened because I just checked and balanced the pool on Friday and everything was pretty normal as always.
Easy Tough diagnostics on chlorinator says Salt:0 ppm and status is OK No errors
I went down to backflush and saw that no lights on my cell were on...I went ahead and backflushed and still no lights. I turned the breakers off and checked the connection to the bottom of the Easy Touch panel and everything looked ok so I hooded it back up and flipped the breakers on and still no lights. I pushed the IntelliChlor circuit breaker reset and it didn't seem to be tripped and the IntelliChlor Status light on the panel is showing green.
Any ideas? This must have just happened because I just checked and balanced the pool on Friday and everything was pretty normal as always.
Easy Tough diagnostics on chlorinator says Salt:0 ppm and status is OK No errors