Finally did this full test ... This is what my results were:
FC = 1.0 (I was actually taken back by this since there has been 1 Trichlor puck in the water since we took possession.)
CC = 0.0
PH = 7.8 (had been about 7.6 the last couple of days)
TA = 130.0 (high ! App says to add Acid to get PH to 7.5 - is that Muriatic Acid or something else?)
CYA = 47.0
CH = 300
TDS = not measured
Salt = not measured
Borates = not measured (didn't add any)
CSI = 0.53 (potential for scaling according to the App - what needs to be done?)
Thanks all ...
FC = 1.0 (I was actually taken back by this since there has been 1 Trichlor puck in the water since we took possession.)
CC = 0.0
PH = 7.8 (had been about 7.6 the last couple of days)
TA = 130.0 (high ! App says to add Acid to get PH to 7.5 - is that Muriatic Acid or something else?)
CYA = 47.0
CH = 300
TDS = not measured
Salt = not measured
Borates = not measured (didn't add any)
CSI = 0.53 (potential for scaling according to the App - what needs to be done?)
Thanks all ...