Hello all,
I have an Aquarite SWG and the cell has no power. I ordered and replaced the main board. Unfortunately, that did not work. I have been reading through this forum and saw that most of the causes related to no power to the cell is a problem with the board. The voltage is showing 14.2 and Im pretty sure its supposed to he around twice that.
Since this is a brand new board, what else should I be looking for? When I power on the unit the no flow light flashes for around 30-45 seconds, then the generating light comes on for about 5 seconds then goes off, then no lights are on. The power light never comes on.
Any ideas besides the board?
I have an Aquarite SWG and the cell has no power. I ordered and replaced the main board. Unfortunately, that did not work. I have been reading through this forum and saw that most of the causes related to no power to the cell is a problem with the board. The voltage is showing 14.2 and Im pretty sure its supposed to he around twice that.
Since this is a brand new board, what else should I be looking for? When I power on the unit the no flow light flashes for around 30-45 seconds, then the generating light comes on for about 5 seconds then goes off, then no lights are on. The power light never comes on.
Any ideas besides the board?