Greetings,
I just added a slide to my pool and I want to automate the operation of the slide so that my kids can turn the water flow to the slide on and off from our Quicktouch remote. I am finding that with my single body version of the Easytouch 4 I may not be able to do this. I am using valves A and B for my cleaner and solar systems but need to add a third to control the slide.
I have seen a lot of posts about Jandy splitters and relays, etc. I am using an Intelliflo pump so my filter pump relay is unused and I have tested the re-use of this relay by plugging it into the 2 speed pump socket and setting a feature to power up that relay from the remote. Since the actuators are also 24V is there a way to use a relay to initiate operation of the actuator?
Any advice would be appreciated!
Thanks
Tom
I just added a slide to my pool and I want to automate the operation of the slide so that my kids can turn the water flow to the slide on and off from our Quicktouch remote. I am finding that with my single body version of the Easytouch 4 I may not be able to do this. I am using valves A and B for my cleaner and solar systems but need to add a third to control the slide.
I have seen a lot of posts about Jandy splitters and relays, etc. I am using an Intelliflo pump so my filter pump relay is unused and I have tested the re-use of this relay by plugging it into the 2 speed pump socket and setting a feature to power up that relay from the remote. Since the actuators are also 24V is there a way to use a relay to initiate operation of the actuator?
Any advice would be appreciated!
Thanks
Tom