We are looking to build a pool and I wanted to get some feedback on our pool. Below is some basic information and a layout of the pool.
~28k gallons
1 - Jandy CL340 - 340 sq-ft cartridge filter
1 - Jandy JEP2.0 - 2 hp variable speed pump
1 - Paramount MDX Main Drain with Safety Drain and Debris Canister
6 - Returns
3 - 18" Waterfalls
I guess my main questions are:
1. I am worried about the circulation of the water on the tanning ledge. I asked if they could install a return on the shelf but the PB says that they will only install one if the water is 12" deep. Should I be worried about circulation on the tanning shelf? Should we put in a bubbler or two on the tanning shelf to help with the circulation? If so, will we need a larger pump?
2. Is the 340 sq-ft cartridge filter large enough or should I upgrade to a 460 sq-ft or the 580 sq-ft? From what I've read, the bigger the better, but I wasn't sure how much larger I needed to go.
3. Is one LED in the deep end going to be enough light for the pool?
Any other comments or suggestions would be appreciated.
Thanks!
~28k gallons
1 - Jandy CL340 - 340 sq-ft cartridge filter
1 - Jandy JEP2.0 - 2 hp variable speed pump
1 - Paramount MDX Main Drain with Safety Drain and Debris Canister
6 - Returns
3 - 18" Waterfalls
I guess my main questions are:
1. I am worried about the circulation of the water on the tanning ledge. I asked if they could install a return on the shelf but the PB says that they will only install one if the water is 12" deep. Should I be worried about circulation on the tanning shelf? Should we put in a bubbler or two on the tanning shelf to help with the circulation? If so, will we need a larger pump?
2. Is the 340 sq-ft cartridge filter large enough or should I upgrade to a 460 sq-ft or the 580 sq-ft? From what I've read, the bigger the better, but I wasn't sure how much larger I needed to go.
3. Is one LED in the deep end going to be enough light for the pool?
Any other comments or suggestions would be appreciated.
Thanks!