Ok, so tested out few options…it looks like the valve with red box around is for the 2 skimmers and valve with the blue box looks like controls the flow from the skimmers and the bottom drain. The picture is showing skimmers in off position in the blue box and in the red box valve in the middle …even flow to both skimmers, i'm assuming.
Oh, even when skimmers are in off mode the pipe in the skimmer has still water pressure.
Now, should both valve be in center? where should i leave them at for normal everyday operation? Any reason why i need to turn one valve off or adjust it?
2nd issue…that i am having and a important one and which is driving me crazy ... because the pool is not being cleaned by the quik clean pops up. Not enough pressure to force the dirt. I believe this is due to low pressure…i read the manuals but have no idea how to fix this issue. As of now this is what i have done, i moved the 3 red valve (not jaden)..in green box half way ….i believe these are return valves; hope this ok? or should i leave them all open…with all open the pressure is very low…!
With having half way, the pressure did go up and the quik clean pop ups are popping out much more with more pressure but not quite enough to move all the debris….The pressure in the filter in normal mode pump running is basically 0 and clean mode it goes up around 8 and drops to 0 afterwards?
Hope, you can help. thank you Mac