Hi All,
I am trying to calibrate the salt level on my Pool Pilot Digital. I have had a water test by a pro and it reads 2200ppm. However, my pool pilot reads 6200ppm. I followed the instructions to calibrate the salt level on my pool pilot but it keeps going back to 6200ppm! here's what I did:
1) Press MENU button
2) Press Arrow UP to MAINTENANCE MENU, then press SELECT
3) Press Arrow UP to CALIBRATE SALT, then press SELECT
4) Adjust the salt display to match the reading of your test by pressing the Arrow UP or DOWN
5) Press SELECT (the unit will take some time to recalibrate the salt display)
6) After calibration is done, "EXIT MENU", press SELECT to return to main display
Any suggestions?
Thanks!
Scoobie
15,000 gallons
cartridge filter
IG (in ground)
pebble
FC - 5.0
CC - 5.0
pH - 7.6
TA - 130
CH -
CYA -
Borates -
I am trying to calibrate the salt level on my Pool Pilot Digital. I have had a water test by a pro and it reads 2200ppm. However, my pool pilot reads 6200ppm. I followed the instructions to calibrate the salt level on my pool pilot but it keeps going back to 6200ppm! here's what I did:
1) Press MENU button
2) Press Arrow UP to MAINTENANCE MENU, then press SELECT
3) Press Arrow UP to CALIBRATE SALT, then press SELECT
4) Adjust the salt display to match the reading of your test by pressing the Arrow UP or DOWN
5) Press SELECT (the unit will take some time to recalibrate the salt display)
6) After calibration is done, "EXIT MENU", press SELECT to return to main display
Any suggestions?
Thanks!
Scoobie
15,000 gallons
cartridge filter
IG (in ground)
pebble
FC - 5.0
CC - 5.0
pH - 7.6
TA - 130
CH -
CYA -
Borates -