I rarely use my lights, but had friends over and was showing them the pool. After about a minute from turning them on, all lights (spa and pool) went out. The pool lights (2) and the spa light (1) are on separate relays.
I pulled each light and checked the bulbs for continuity with a multimeter - each checked out ok (not burnt). I then checked the relays in the EasyTouch panel and they checked ok. Each was confirmed to have control from the EasyTouch and power after actuated. I turned them on and off several times to confirm.
I checked voltage at the bulb sockets and got none after actuating from EasyTouch. I must be missing something in the EasyTouch panel or bulb check by continuity is not reliable.
Any help is appreciated.
I pulled each light and checked the bulbs for continuity with a multimeter - each checked out ok (not burnt). I then checked the relays in the EasyTouch panel and they checked ok. Each was confirmed to have control from the EasyTouch and power after actuated. I turned them on and off several times to confirm.
I checked voltage at the bulb sockets and got none after actuating from EasyTouch. I must be missing something in the EasyTouch panel or bulb check by continuity is not reliable.
Any help is appreciated.