I drank the PB Kool Aid and had the ozone system installed - I have done my monday morning research and am looking at installing a SWCG next year - In the meantime I had installed a tab feeder. The PB installed the chlorinator downstream of the ozone generator so all of the gas from the ozone constantly air locked the feeder. I am going to re-plumb a few things and get it installed before the ozone feed. As for now - I am putting my tabs in the skimmer for a few weeks until I get the feeder issue worked out - I am running my pump 24/7.
With the ozone - I was told to keep my CL residual around 1ppm. Is that correct?
The following are my test results from this am
Free CL = 2.68
Total CL = 2.79
Alkalinity = 92
Hardness = 201
CYA = 42
Water looks great. Any suggestions on my results
With the ozone - I was told to keep my CL residual around 1ppm. Is that correct?
The following are my test results from this am
Free CL = 2.68
Total CL = 2.79
Alkalinity = 92
Hardness = 201
CYA = 42
Water looks great. Any suggestions on my results