Help! We have an 18,500 inground vinyl pool. After 5 years of using baquacil we decided to change to salt because of expense and cloudy water. The pool store said there was only a little sanitzer showing and to just add 25lbs. fresh and clear and then it should be ready. We did that and the water turned milky for a few minutes and then cleared up. THey said we were ready to do the conversion once the water was clear. We added the salt, changed the filter sand, and turned on the SWG. The water turned milky once the SWG started. FC is not showing up when the water is tested. Now, pool store says add more Fresh n Clear. We now have added 75lbs. of the stuff and the baquacil sanitizer is still showing to be slightly in the water when we use the Baqucil test strips. Ive poured bleach in a bucket of pool water and there is no color change. What do we do now that the salt is in the pool?