I am in the middle of installing a pool timer and adding a salt water generator (Compupool) to update my inground pool. Originally the pump was operated with an on/off switch box mounted to the wall. Looking at the wiring inside the switch I noticed that the bonding wire entered the box and was connected to the ground wires via lug. Also the pump has no bonding wire connected to it at all. Tomorrow I will be mounting the pool timer to the wall in place of the switch and my thought was I should add another electrical box to house the bonding wire that comes out of the ground. In this new electrical box I was going to connect a new 8 AWG copper wire that ran to the pump and salt water generator. Is this the proper way to do it? If so do I need to run a "loop" of the new copper wire that starts at the electrical box and ends at the electrical box or in a line that ends at the SWG?
Thanks for your help!
Eric
Thanks for your help!
Eric