So I pulled a dumb move yesterday. I wanted to soak my cartridge elements overnight to clean them. My pump starts at 9:45 am and stops at 4:00pm. Friday night I disassembled everything and pressed the "service" button on the easy touch thinking this would stop any thing from turning on, even though I was getting up early so it would be reassembled by 9:45 when the pump turns on. As I'm walking down to the equip pas at 8:15am I hear a humming. What!! Evidently the freeze protection turned on as the low temp was 33 deg so the pump had been running dry for ??? hrs. I flipped the breaker for the pump which I should have done in the first place. After crying a little I put it all back together and crossed my fingers....all seems to work fine but I wonder if I hurt something?
As a secondary question is the freeze protection level able to be adjusted on the easy touch?
As a secondary question is the freeze protection level able to be adjusted on the easy touch?