- Oct 23, 2008
- 90
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I have a Hayward Ecostar VS pump that is controlled with a Goldline Pro-Logic using the communication interface. I read in a post on this forum that the pump should be wired directly to the breaker and not wired to the Pro-Logic pump relay:
1. I'd like to know if wiring directly to the breaker instead of the Pro-Logic relay is correct;
2. If I bypass the Pro-Logic relay, then does the communication interface detect low/no flow to the pump and it would shutoff the pump?
Thanx
Rick
1. I'd like to know if wiring directly to the breaker instead of the Pro-Logic relay is correct;
2. If I bypass the Pro-Logic relay, then does the communication interface detect low/no flow to the pump and it would shutoff the pump?
Thanx
Rick