I created a new topic separate from intellichem for this question because I wanted to get a clear answer and because the question might relate to other equipment:
The intellichem controls both acid and swg runs. By default, it will allow acid to be mixed while the SWG is running...it also warns that acid should not be dumped while liquid chlorine is being mixed and has a setting to force chlorine sources to shutoff when acid is dumped. I assume that this warning should not apply to an SWG or should it? Both result in chlorine and the intellichem runs an SWG at full power which means a non trivial amount is being added.
I looked into enabling the force shutoff by default just for safety but it is causing issues...(interrupted swg runs do not restart for several hours later, and then can get interrupted again...)
I have a question into pentair on this...but how much should I be worrying about this? Note that when acid is mixed, it goes into a dedicated canister which is slowly fed into a pipe just before the SWG. The pool builder left the default system simultaneous setting enabled when it was first configured.
The intellichem controls both acid and swg runs. By default, it will allow acid to be mixed while the SWG is running...it also warns that acid should not be dumped while liquid chlorine is being mixed and has a setting to force chlorine sources to shutoff when acid is dumped. I assume that this warning should not apply to an SWG or should it? Both result in chlorine and the intellichem runs an SWG at full power which means a non trivial amount is being added.
I looked into enabling the force shutoff by default just for safety but it is causing issues...(interrupted swg runs do not restart for several hours later, and then can get interrupted again...)
I have a question into pentair on this...but how much should I be worrying about this? Note that when acid is mixed, it goes into a dedicated canister which is slowly fed into a pipe just before the SWG. The pool builder left the default system simultaneous setting enabled when it was first configured.