Autopilot DG-220 pump motor replacement

[bartlettcl]

I just installed a new Hayward replacement pump motor. When I flipped the breaker back on to power my system the DG-220 came on and my pump came on. Now the pump runs all the time and I can't turn it off with the DG-220. Any suggestions?

 

[Poolsean]

Check and make sure the DIG220 is still programmed to run the pump. Did you change anything in the pump wiring internally?

 

[thepoolman]

Did you remove the wires from the autopilot when changing the motor? If you did, sounds like when you re-wired everything you wired the pump back up to where the power comes into the unit and not where the unit gives power to the pump.