I'm about to build a 20x40..... I have a bit of knowledge on the electrical side of the pool build... As it all seems to be the same as regular wiring in wet areas (gcfi plugs, etc)... What I'm not sure of is the bonding... From what I've read on this site and google here is the plan
Ground wire connected to everything metal close to the pool... Including the metal pool walls, light housings, ladder, and diving board... A ground wire run all the way around the pool about 10 inches from the pool wall... All connected together and run back to the pool pump area....
Is this correct?
Where does this wire connect to when it gets back to the pump?
Also... I don't plan on using rebar in my cement skirt as I will put fiber in the cement to take the place of it... So I won't have rebar to connect it to...
Any thoughts are appreciated!!
Ground wire connected to everything metal close to the pool... Including the metal pool walls, light housings, ladder, and diving board... A ground wire run all the way around the pool about 10 inches from the pool wall... All connected together and run back to the pool pump area....
Is this correct?
Where does this wire connect to when it gets back to the pump?
Also... I don't plan on using rebar in my cement skirt as I will put fiber in the cement to take the place of it... So I won't have rebar to connect it to...
Any thoughts are appreciated!!