Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: Repair Flaking paint/coating on bottom of pool

  1. Back To Top    #1

    Join Date
    Dec 2007
    Location
    Wilton Manors, FL
    Posts
    1

    Repair Flaking paint/coating on bottom of pool

    I have an inground pool in south Florida, 15' x 30', 12,000 gal. There is an area on the bottom, about 1 foot in diameter where some coating is peeling up. If I pick off a piece, it appears to be a fiberglass layer, under which I see what looks like concrete. The remainder of the pool is in very good condition.

    Is there a way to repair this small piece of missing coating on the bottom? I'm afraid to drain the pool, fearing the pool will float. We are near the ocean, and the water table seems to be about 2 feet down.

    Recommendations, from do-it-yourself to hiring a repair contractor would be appreciated.
    rgomez
    griffith, in.
    ag 24' round
    13,5??? gal.
    hayward sandfilter 250#
    pump unknown

  2. Back To Top    #2

    In the Industry
    duraleigh's Avatar
    Join Date
    Apr 2007
    Location
    Sebring, Florida
    Posts
    28,398
    Hi, Greg. WElcome to the forum. Do you know if your pool is fibreglas or concrete? Actually, either way, I think you're gonna need a professional opinion....someone who can visit the pool and suggest a fix.

    You can try a few pics but the usually aren't very definitive underwater.

    Let us know aqbout the concrete/fibreglas and try a pic. Someone here may be able to help.
    Attached Images Attached Images
    Dave S. - Forum owner
    42k vinyl and concrete pool, 1.5hp pump, 140gpm filter
    TFTestkits , PoolMath , Pool School

  3. Back To Top    #3

    Join Date
    Jan 2008
    Location
    Forney, TX
    Posts
    162
    I wouldn't try fixing it yourself, have a pool builder come out and take a look at it. The pool can be drained temporarily for repairs. If it is a fiberglass pool, they can reglass the damaged area. I haven't heard of fiberglass being laid over concrete though, so if you really are seeing concrete you may have a gunite pool with delaminating plaster. That too can be repaired, but it may continue to happen in other areas of the pool. You shouldn't have any trouble with the pool raising out unless it's left dry for an extended period. Typically when they're doing repairs they just drain it long enough to make the repairs, then fill it again (1 or 2 days at the most). Good luck!
    Our pool adventure... click here

  4. Back To Top    #4
    JasonLion's Avatar
    Join Date
    May 2007
    Location
    Silver Spring, MD
    Posts
    37,887
    I disagree about draining. In areas with particularly high water tables draining the pool can cause immediate and very expensive damage. There is always a way to deal with it so the pool can be drained. Worst case, wells are dug around the pool and water pumped out to lower the water table. Many concrete/plaster pools in can survive draining because commonly the water table is reasonably low. However, unless you know that the water table is below the bottom of the pool, it is best to err on the side of caution.
    19K gal, vinyl, 1/2 HP WhisperFlo pump, 200 sqft cartridge filter, AutoPilot Digital SWG, Dolphin Dynamic cleaning robot
    Creator of PoolMath and Pool Calculator. Other handy links: Support this site, TF Test Kits, Pool School

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •