- Mar 17, 2010
- 78
Well my PH and TA have been getting high, so I've decided to do something about it finally. Ive never had to lower TA so i just want to check that i'm doing ti correctly. Today's test results were:
FC 5
CH 250
TA 250
PH 8.2
CYA 20
So according to what I've read, I've got about 4 gallons of MA, and the LPS told me to only dose about 2 qts at a time. I've made 2 DIY pvc aerators. I just put in the first dose of MA and i'm gonna wait about a half hour to check the ph again.
It's my understanding that i should only add more MA once the ph reaches about 7.6 again correct? Anything else i should know or am missing?
FC 5
CH 250
TA 250
PH 8.2
CYA 20
So according to what I've read, I've got about 4 gallons of MA, and the LPS told me to only dose about 2 qts at a time. I've made 2 DIY pvc aerators. I just put in the first dose of MA and i'm gonna wait about a half hour to check the ph again.
It's my understanding that i should only add more MA once the ph reaches about 7.6 again correct? Anything else i should know or am missing?