Hi Every one,
First off I want to say hello to every one as I am new to the forum.
I am in a pickle here and I have tried every thing I can think of.
and so fare nothing has worked.
Specs:
20,000 Gal Salt Pool
Jandy Aqua Pure 1400 with 3 Port Cell
Wired up for 240VAC
I have just installed a brand New System:
http://www.poolsupplyworld.com/poolsupp ... RE1400.htm
And I am still getting Error codes 181 & 172.
I get The "Service" Light on all the time and sometimes the "Cell Reversing" light too.
I am not getting "Flow" or "Cell On" at all.
The Sensor is giving me the 3 normal readings from the wall unit but also Code 181.
checked the VAC but still getting code 172.
I am at a loss because my old System that was A Chromatic 301 2 Port cell system gave me the same readings.
I spent almost $900 to replace that 7+ years system to remedy this but, i am still getting the same problems.
I have replaced the entire wall unit, Cell, sensor and DC cord. I have checked my VAC and it is at the needed
Voltage for the system which is 240V
Any help would be greatly appreciated as My pool is starting to go green and I am having to manually through
Chlorine in the pool and Shock the pool every week. This has been an ongoing problem for a month now.
First off I want to say hello to every one as I am new to the forum.
I am in a pickle here and I have tried every thing I can think of.
and so fare nothing has worked.
Specs:
20,000 Gal Salt Pool
Jandy Aqua Pure 1400 with 3 Port Cell
Wired up for 240VAC
I have just installed a brand New System:
http://www.poolsupplyworld.com/poolsupp ... RE1400.htm
And I am still getting Error codes 181 & 172.
I get The "Service" Light on all the time and sometimes the "Cell Reversing" light too.
I am not getting "Flow" or "Cell On" at all.
The Sensor is giving me the 3 normal readings from the wall unit but also Code 181.
checked the VAC but still getting code 172.
I am at a loss because my old System that was A Chromatic 301 2 Port cell system gave me the same readings.
I spent almost $900 to replace that 7+ years system to remedy this but, i am still getting the same problems.
I have replaced the entire wall unit, Cell, sensor and DC cord. I have checked my VAC and it is at the needed
Voltage for the system which is 240V
Any help would be greatly appreciated as My pool is starting to go green and I am having to manually through
Chlorine in the pool and Shock the pool every week. This has been an ongoing problem for a month now.