This week I had to add salt to the pool because my salt level had fallen to 2,800 ppm. I increased the salt level to 3,400 ppm. I noticed that the reported voltage had changed. At a salt level of 2,800 the control unit reported 24 volts. At a salt level of 3,400 the control unit reported 22 volts. The amperage was the same at 6.5 amps. [Level 2]
An increase in salt would increase the conductivity of the water. Does the control unit reduce the voltage in order to maintain a constant 6.5 amps? Is there an advantage of operating the SWG at the lower voltage level?
An increase in salt would increase the conductivity of the water. Does the control unit reduce the voltage in order to maintain a constant 6.5 amps? Is there an advantage of operating the SWG at the lower voltage level?