Hi All,
I'm replacing my old Intermatic manual timer with the EH10 digital model, Trouble is it doesn't work
I hooked up the timer as I thought it should be however it didn't send 120v when I switched it manually. I then saw on page 7 of the manual I need to install a jumper between post 2/3 (line-black wires). I did that and turned it on and it popped my breaker. his is where I stop and ask for help.
Maybe I'm missing something. Pump is 120V. Here is a link to the manual which seems poorly written to me. I hooked up the old one no problem so I'm not sure why this one doesn't work.
http://www.intermatic.com/~/media/files/intermatic/products/instructions/timers/eh10 - english.ashx
Thanks for any advice. I don't want to burn out my pump due to incorrect wiring.
Joe
I'm replacing my old Intermatic manual timer with the EH10 digital model, Trouble is it doesn't work
I hooked up the timer as I thought it should be however it didn't send 120v when I switched it manually. I then saw on page 7 of the manual I need to install a jumper between post 2/3 (line-black wires). I did that and turned it on and it popped my breaker. his is where I stop and ask for help.
Maybe I'm missing something. Pump is 120V. Here is a link to the manual which seems poorly written to me. I hooked up the old one no problem so I'm not sure why this one doesn't work.
http://www.intermatic.com/~/media/files/intermatic/products/instructions/timers/eh10 - english.ashx
Thanks for any advice. I don't want to burn out my pump due to incorrect wiring.
Joe