Hello all, I have an Easytouch 4sp and a Wireless Controler that does not match up. All seems to work Ok except for Intellipro pump settings and maybe the new IC40 cell control.
Here are the versions of software? What do I need to do to get in synch?
__________________________
Wireless Control
UWC 2.010
UOC 2.060
Bootloader Rev
uic 1.010
uoi 1.010
___________________________
Control Panel
UIC 1.060
UOC 2.060
Bootloader Rev
uic 1.010
uoi 1.010
____________________________
Can I take the wireless to the pool store (a real one that sells and installs Pentair) and just have them flash the wireless control to match or do they have to come out and do BOTH. Or should I call the local Pentair rep. He was helpful with some other local pools.
B
Here are the versions of software? What do I need to do to get in synch?
__________________________
Wireless Control
UWC 2.010
UOC 2.060
Bootloader Rev
uic 1.010
uoi 1.010
___________________________
Control Panel
UIC 1.060
UOC 2.060
Bootloader Rev
uic 1.010
uoi 1.010
____________________________
Can I take the wireless to the pool store (a real one that sells and installs Pentair) and just have them flash the wireless control to match or do they have to come out and do BOTH. Or should I call the local Pentair rep. He was helpful with some other local pools.
B