I think I need some help here. First time pool owner, so this is all new to me. I just got the TF-100 kit and ran all the tests. For some quick background the pool is a rectangular vinyl lined 20x40 with deep end - 30K gallons. I have a SWG set on 40% that runs for 10 hours when the pump runs. The pool has been open (running) for a week, but we haven't been in it yet. The SWG generator shows my salt level at about 2800 (I know I need to bring that up a bit). So here are the results:
Temp: 61
FC: 0
CC: 1
TC: 1
pH: 7.2
T/A: 80
CH: 190
CYA: 0 (the water was not cloudy at all during the test)
It sounds like maybe I need to set the SWG to superchlorinate for a cycle, but I haven't messed with anything yet. I wanted to get some advice from the experts before I change anything.
Thanks,
Shane
Temp: 61
FC: 0
CC: 1
TC: 1
pH: 7.2
T/A: 80
CH: 190
CYA: 0 (the water was not cloudy at all during the test)
It sounds like maybe I need to set the SWG to superchlorinate for a cycle, but I haven't messed with anything yet. I wanted to get some advice from the experts before I change anything.
Thanks,
Shane