I have an Intex Ultra Frame 24'x12'x52" with a sand filter pump and Intex SWG. Here are my numbers as of today. I filled the pool up last week and put the amount of salt in it the SWG said to(210lbs). I had no CYA or FC as of yesterday and the local pool shop said to add a pound of shock. I did and it raised my FC but muy CYA is still 0.
Before shock results:
CYA 0
Total Alk 80-120
PH 7.2
FC 0
Hardness 200
Copper 0
Sodium(salt) 2780ppm
After shock:
YA 0
Total Alk 80-120
PH 7.5
FC 2/4
Hardness 200
Copper 0
Sodium(salt) 2780ppm
do i need to bring up the copper and FC? If so how. All that is in the pool is water, salt and the 1lb of shock added last night.
TIA
JC
Before shock results:
CYA 0
Total Alk 80-120
PH 7.2
FC 0
Hardness 200
Copper 0
Sodium(salt) 2780ppm
After shock:
YA 0
Total Alk 80-120
PH 7.5
FC 2/4
Hardness 200
Copper 0
Sodium(salt) 2780ppm
do i need to bring up the copper and FC? If so how. All that is in the pool is water, salt and the 1lb of shock added last night.
TIA
JC