I have an older model AutoClear Plus SWG that is giving me an error code 94.
It does not have an external fuse inside CPU on the bottom of unit.
Fuse inside transformer box is in perfect condition.
All wiring is intact (I even tested for continuity)
I cleaned the cell per manufacturer details.
I have recently added 5-50 lbs of salt to my 12,000gal pool (which has been over 48 hours)
Pool and all equipment is about 7 years old.
DO I NEED TO REPLACE THE CELL OR THE CPU?
Does the newer cells have same wire harness connection fitting to match my CPU?
Any help would be appreciated.
Thank You
It does not have an external fuse inside CPU on the bottom of unit.
Fuse inside transformer box is in perfect condition.
All wiring is intact (I even tested for continuity)
I cleaned the cell per manufacturer details.
I have recently added 5-50 lbs of salt to my 12,000gal pool (which has been over 48 hours)
Pool and all equipment is about 7 years old.
DO I NEED TO REPLACE THE CELL OR THE CPU?
Does the newer cells have same wire harness connection fitting to match my CPU?
Any help would be appreciated.
Thank You