Hi everyone, I just got my TF-100xl today here are my results
TA = 70
CH = 280
FC = 3.5
CC = .5
CYA = 0 was at 50 a year ago pool has a leak
ph = 7.6 with old test kit (fresh drops)
ph = with new taylor looked higher and had trouble reading
Pool is in Palm Beach Gardens, Florida (south Fl). water is pretty clear, I'm beginning to get an algae bloom.
It's a Marcite pool and it's 15,000 gallons (give or take 5,000 gallons, seriously I have no clue). 1/2 gallon of 10.5 % chlorine added 3.5ppm. Pool calculator can tell me my gallons i think so I'll check there.
This is my first post, but I've been lurking on this site for awhile so I know a lot about BBB from reading the forum.
I found some old trichlor pucks 10 years old at least factory sealed and have been using them when I run out of chlorine. I thought I would have at least some CYA even with the leak.
Your advice is greatly appreciated!
TA = 70
CH = 280
FC = 3.5
CC = .5
CYA = 0 was at 50 a year ago pool has a leak
ph = 7.6 with old test kit (fresh drops)
ph = with new taylor looked higher and had trouble reading
Pool is in Palm Beach Gardens, Florida (south Fl). water is pretty clear, I'm beginning to get an algae bloom.
It's a Marcite pool and it's 15,000 gallons (give or take 5,000 gallons, seriously I have no clue). 1/2 gallon of 10.5 % chlorine added 3.5ppm. Pool calculator can tell me my gallons i think so I'll check there.
This is my first post, but I've been lurking on this site for awhile so I know a lot about BBB from reading the forum.
I found some old trichlor pucks 10 years old at least factory sealed and have been using them when I run out of chlorine. I thought I would have at least some CYA even with the leak.
Your advice is greatly appreciated!