Somehow one of my wall jets is missing. I think it must have come off and was sucked by the cleaner and then thrown away. The pool has 5 jet returns, 2 skimmers and one main drain.
When I say it is missing, all that is left is a 1.5" sch smooth 80 bare pipe opening in the wall. There is no evidence that the original fitting was solvent welded in place (primer and glue not there).
I bought a 1.5" insert, but it will not fit. The inserts are made to be inserted into sch 40 pipe, but my pipe is sch 80 (so the insert is too large to fit into the wall opening).
The original jets are Pentair.
Ideas on how to repair?
Thanks,
Todd
When I say it is missing, all that is left is a 1.5" sch smooth 80 bare pipe opening in the wall. There is no evidence that the original fitting was solvent welded in place (primer and glue not there).
I bought a 1.5" insert, but it will not fit. The inserts are made to be inserted into sch 40 pipe, but my pipe is sch 80 (so the insert is too large to fit into the wall opening).
The original jets are Pentair.
Ideas on how to repair?
Thanks,
Todd