Hi everyone, my new plaster pool just turned 2 months old and I have a couple of questions if I may. I'm in Oklahoma and it gets fairly cold, 19 deg tonight, :-( What temp do most of you set your freeze protection for? The lowest mine goes is 33, is that usually safe, or should I keep it at 35-36 where the pb had it? The Sensor reads 2-3 deg higher than it is outside...but is should take awhile for all that water to cool off, except in the booster pump....hmmmm.
Ta-60 ph-7.8 cya 40, ch 260, fc 3, I want to do the bbb thing but I'm using pucks thru the winter. My ta keeps drifting down and ph climbs. I've reset the ta twice up to 110. I add a qt. of acid every other day to keep ph down under 8, should I be worried about the ta, or let it stay at 50-60 and just dial in the ph for now? And how about that ch??
This is a GREAT site and I've learned sooo much already,
Thanks!
Leasa
Ta-60 ph-7.8 cya 40, ch 260, fc 3, I want to do the bbb thing but I'm using pucks thru the winter. My ta keeps drifting down and ph climbs. I've reset the ta twice up to 110. I add a qt. of acid every other day to keep ph down under 8, should I be worried about the ta, or let it stay at 50-60 and just dial in the ph for now? And how about that ch??
This is a GREAT site and I've learned sooo much already,
Thanks!
Leasa