Hello. First post. First newbie question. I just bought a house with a pool and Aqua Rite SWG. I'm trying to get it all up and running, as the previous owner apparently let the system go. I added 200 pounds of Morton pool salt based on the manual's recommendation (15,000 gallon pool and salt reading at 1200) trying to ease my way up to the 3200 ppm. After 24 hours, the reading stands at 1700, which leads me to believe either I badly miscalculated the pool size or the panel is in error. Should I continue to add salt, say another 200 pounds, or do I stop now and test the salt level with strips (or both)? The panel's No Flow and Check Salt are steady on, and the pool place told me there was "zero" chlorine in the water, so I know the SWG hasn't been generating for awhile. The cell is a t-15, and it's about four years old. I appreciate any advice. Thanks.