I have had my AutoPilot Digital with the SC-48 cell for about 2 months now and am contently struggling to keep my FC above 2. Which (I think) causes the Algae to continually grow on my pool walls. My water is clear but I have Algae (black) on the pool walls. If I run the unit in Boost mode the FC rises. I run the pump 12 hours a day with the AutoPilot on power level 3 at 90%. Here are my water stats:
SC-48 Cell
Cell Power: 28V 8.5A
20,000 Gallons
Water temp 88
Salt 3200 ppm
FC 2
PH 7.4
TA 150
CH 325
CYA 90
I need some help! Should I have gotton the SC-60 cell and is it possible to switch from the SC-48 to the SC-60.
Mark
SC-48 Cell
Cell Power: 28V 8.5A
20,000 Gallons
Water temp 88
Salt 3200 ppm
FC 2
PH 7.4
TA 150
CH 325
CYA 90
I need some help! Should I have gotton the SC-60 cell and is it possible to switch from the SC-48 to the SC-60.
Mark