We havent used our pool since last Summer. I drained about 1/3 of the water and covered our 9'x18'x48". This Summer I scrubbed the sides, bought a new pump (because the pump that came with this intex pump blew) added a gallon of instant conditioner, 1 lb of fresh and clear and chlorine. The green lingered around so I pumped most of it out with the vacuum and continued to run the pump, cleaning it very frequently. I took in a sample to Leslie's Pool Supply and they recommended adding 1lb of Chlor-brite. We did that waited a week, and it was still cloudy. All the levels from our test were fine, but we still took in a water sample to Leslie's again. They then recommended adding 2 oz of Ultrabrite. We did that yesterday and today it is still cloudy (white) We can see about 1 1/2 feet down in the water. The rest is cloudy. What should we do now???? This is our first pool, so we are at a loss. Please help. Thanks so much for any answers.
Our levels are:
FAC 3
TAC 3
CH 170
CYA 100
TA 130
PH 7.2
PHO 500
Our levels are:
FAC 3
TAC 3
CH 170
CYA 100
TA 130
PH 7.2
PHO 500